b5bfef0435
- post-install: ensure the `microcode` initramfs hook (after autodetect) so installed systems carry CPU ucode — the live ISO embeds it, so nothing is staged onto the target otherwise. Rebuild all presets with `mkinitcpio -P`. - post-install: drop the nonexistent `sd-plymouth` hook branch; only the udev `plymouth` hook exists. Set the theme then rebuild once. - packages: add zathura + zathura-pdf-mupdf (BOS had no PDF viewer) and libva-utils (`vainfo`); the Mesa VA-API backend now ships in `mesa` itself. - bos-welcome: on first run, if NetworkManager isn't fully online, open nmtui so the user connects before the first bos-update/pacman (avoids confusing DNS errors on a fresh install). Float the bos-netsetup window like bos-welcome. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
177 lines
10 KiB
Bash
177 lines
10 KiB
Bash
#!/bin/bash
|
|
# BOS-specific finalization, run inside the installed-system chroot (Calamares
|
|
# shellprocess), AFTER the native initcpio module has built the initramfs. The
|
|
# kernel (shellprocess@kernel) and initramfs (initcpio) are in place by now, so
|
|
# this script installs GRUB and does the rest of setup. Calamares' own
|
|
# `bootloader`/`grubcfg` modules are NOT used — in this archiso layout they leave
|
|
# the ESP empty and abort; the explicit grub-install below is verified to boot.
|
|
# Best-effort: do NOT use `set -e`; a single failure here must not abort the rest.
|
|
set -uo pipefail
|
|
|
|
MAIN_USER="$(getent passwd 1000 | cut -d: -f1 || true)"
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Strip live-only bits that unpackfs copied verbatim from the live medium.
|
|
# ---------------------------------------------------------------------------
|
|
rm -f /etc/systemd/system/getty@tty1.service.d/autologin.conf
|
|
rm -f /etc/systemd/system/bos-live-setup.service \
|
|
/etc/systemd/system/multi-user.target.wants/bos-live-setup.service
|
|
rm -f /usr/local/bin/bos-live-setup /usr/local/bin/bos-launch-calamares
|
|
rm -f /etc/sudoers.d/99-bos-live
|
|
userdel -r liveuser 2>/dev/null || true
|
|
|
|
# Root used a passwordless entry on the live medium; lock it (sudo model).
|
|
passwd -l root || true
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Pacman keyring. The live medium's /etc/pacman.d/gnupg doesn't reliably carry
|
|
# over to the target (unpackfs may skip it / perms differ), leaving the installed
|
|
# system unable to verify package signatures — the first `pacman -Syu` then dies
|
|
# with "keyring is not writable / required key missing". Initialise it here so a
|
|
# fresh install can update out of the box. archlinux-keyring is already present;
|
|
# [breadway] is SigLevel=Never so it needs no key.
|
|
# ---------------------------------------------------------------------------
|
|
if command -v pacman-key &>/dev/null; then
|
|
pacman-key --init || echo "WARN: pacman-key --init failed"
|
|
pacman-key --populate archlinux || echo "WARN: pacman-key --populate failed"
|
|
fi
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Initramfs HOOKS: microcode + plymouth. Edit HOOKS first, rebuild once below.
|
|
# microcode — embeds the (autodetect-pruned) CPU microcode into the initramfs
|
|
# so it loads at early boot. The live ISO embeds ucode the same way, so the
|
|
# ISO /boot carries no separate ucode image and bos-copy-kernel stages none
|
|
# onto the target — the installed initramfs must therefore carry it itself.
|
|
# Must sit AFTER `autodetect` so it's pruned to the running CPU's microcode.
|
|
# plymouth — the BOS boot splash. Only the udev `plymouth` hook exists (there
|
|
# is NO `sd-plymouth`), so always insert it after `udev`.
|
|
# All best-effort: a failure here still leaves a bootable initramfs.
|
|
# ---------------------------------------------------------------------------
|
|
if [[ -f /etc/mkinitcpio.conf ]]; then
|
|
if ! grep -qE '^HOOKS=.*\bmicrocode\b' /etc/mkinitcpio.conf; then
|
|
sed -i 's/^\(HOOKS=.*\bautodetect\b\)/\1 microcode/' /etc/mkinitcpio.conf \
|
|
|| echo "WARN: adding microcode hook failed"
|
|
fi
|
|
if command -v plymouth-set-default-theme &>/dev/null \
|
|
&& ! grep -qE '^HOOKS=.*\bplymouth\b' /etc/mkinitcpio.conf; then
|
|
sed -i 's/^\(HOOKS=.*\budev\b\)/\1 plymouth/' /etc/mkinitcpio.conf \
|
|
|| echo "WARN: adding plymouth hook failed"
|
|
fi
|
|
fi
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Boot splash (Plymouth) — BOS logo + spinner instead of kernel text. Set the
|
|
# theme + cmdline BEFORE grub so grub.cfg picks up the new cmdline.
|
|
# ---------------------------------------------------------------------------
|
|
if command -v plymouth-set-default-theme &>/dev/null; then
|
|
# Clean boot: splash activates plymouth; hiding systemd status removes the
|
|
# "[ OK ] Started ..." text (what looked like kernel output) even if the
|
|
# splash itself doesn't grab the display (e.g. in some VMs).
|
|
if ! grep -q 'splash' /etc/default/grub 2>/dev/null; then
|
|
sed -i 's/^\(GRUB_CMDLINE_LINUX_DEFAULT="\)/\1splash quiet vt.global_cursor_default=0 systemd.show_status=false rd.systemd.show_status=false rd.udev.log_level=3 /' \
|
|
/etc/default/grub || echo "WARN: adding splash cmdline failed"
|
|
fi
|
|
plymouth-set-default-theme bos || echo "WARN: plymouth-set-default-theme failed"
|
|
fi
|
|
|
|
# Rebuild every preset (default + fallback that bos-copy-kernel wrote) so the
|
|
# microcode + plymouth HOOKS above are actually baked into the initramfs.
|
|
mkinitcpio -P || echo "WARN: mkinitcpio -P failed"
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Install GRUB (UEFI). /boot now has the kernel + initramfs, and the mount
|
|
# module has bind-mounted /proc /sys /dev /run + efivars into this chroot, so
|
|
# both grub-install passes and grub-mkconfig succeed.
|
|
# 1. NVRAM entry (EFI/BOS/grubx64.efi + a firmware boot entry)
|
|
# 2. --removable copy to EFI/BOOT/BOOTX64.EFI, so firmware that ignores/loses
|
|
# the NVRAM entry (the "no boot device / PXE fallback" failure) still finds
|
|
# a bootloader.
|
|
# ---------------------------------------------------------------------------
|
|
if command -v grub-install &>/dev/null; then
|
|
grub-install --target=x86_64-efi --efi-directory=/boot/efi \
|
|
--bootloader-id=BOS --recheck \
|
|
|| echo "WARN: grub-install (nvram) failed"
|
|
grub-install --target=x86_64-efi --efi-directory=/boot/efi \
|
|
--removable --recheck \
|
|
|| echo "WARN: grub-install (removable) failed"
|
|
fi
|
|
if command -v grub-mkconfig &>/dev/null; then
|
|
grub-mkconfig -o /boot/grub/grub.cfg || echo "WARN: grub-mkconfig failed"
|
|
fi
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Snapper root config (root is btrfs).
|
|
# ---------------------------------------------------------------------------
|
|
if command -v snapper &>/dev/null; then
|
|
snapper -c root create-config / || echo "WARN: snapper create-config failed"
|
|
if [[ -f /etc/snapper/configs/root ]]; then
|
|
sed -i 's/TIMELINE_CREATE="yes"/TIMELINE_CREATE="no"/' /etc/snapper/configs/root
|
|
sed -i 's/NUMBER_CLEANUP="no"/NUMBER_CLEANUP="yes"/' /etc/snapper/configs/root
|
|
sed -i 's/NUMBER_MIN_AGE="[^"]*"/NUMBER_MIN_AGE="1800"/' /etc/snapper/configs/root
|
|
sed -i 's/NUMBER_LIMIT="[^"]*"/NUMBER_LIMIT="10"/' /etc/snapper/configs/root
|
|
sed -i 's/NUMBER_LIMIT_IMPORTANT="[^"]*"/NUMBER_LIMIT_IMPORTANT="5"/' /etc/snapper/configs/root
|
|
[[ -n "$MAIN_USER" ]] && \
|
|
sed -i "s/ALLOW_USERS=\"\"/ALLOW_USERS=\"$MAIN_USER\"/" /etc/snapper/configs/root
|
|
fi
|
|
fi
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# System services. Enable each one INDEPENDENTLY: `systemctl enable a b c`
|
|
# resolves every unit first and enables NONE if any one can't be loaded, so a
|
|
# single wrong/absent unit name would silently leave NetworkManager (etc.)
|
|
# disabled. The loop isolates failures to the offending unit.
|
|
# greetd — graphical login (shipped disabled; live uses tty autologin)
|
|
# grub-btrfsd — regenerates GRUB snapshot entries (the unit is grub-btrfsd.service,
|
|
# NOT grub-btrfs.path, which no longer exists)
|
|
# ---------------------------------------------------------------------------
|
|
for unit in NetworkManager.service bluetooth.service systemd-timesyncd.service \
|
|
tlp.service greetd.service snapper-cleanup.timer grub-btrfsd.service \
|
|
fstrim.timer cups.socket avahi-daemon.service ufw.service \
|
|
fwupd-refresh.timer reflector.timer; do
|
|
systemctl enable "$unit" || echo "WARN: failed to enable $unit"
|
|
done
|
|
systemctl set-default graphical.target || echo "WARN: set-default graphical failed"
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# mDNS resolution (nss-mdns): insert mdns_minimal into the hosts: line so the
|
|
# resolver answers *.local (network printers, other hosts) via avahi. Idempotent.
|
|
# ---------------------------------------------------------------------------
|
|
if [[ -f /etc/nsswitch.conf ]] && ! grep -q 'mdns_minimal' /etc/nsswitch.conf; then
|
|
sed -i 's/^\(hosts:[[:space:]]*\)/\1mdns_minimal [NOTFOUND=return] /' \
|
|
/etc/nsswitch.conf || echo "WARN: wiring nss-mdns failed"
|
|
fi
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Firewall: deny inbound by default, allow outbound, and permit inbound mDNS so
|
|
# avahi printer/service discovery keeps working. Best-effort — rule application
|
|
# happens at boot; here we only persist the policy + enable the unit.
|
|
# ---------------------------------------------------------------------------
|
|
if command -v ufw &>/dev/null; then
|
|
ufw default deny incoming || echo "WARN: ufw default deny incoming failed"
|
|
ufw default allow outgoing || echo "WARN: ufw default allow outgoing failed"
|
|
ufw allow 5353/udp || echo "WARN: ufw allow mDNS failed"
|
|
ufw --force enable || echo "WARN: ufw enable failed"
|
|
fi
|
|
|
|
# The bread ecosystem (bakery + bread, breadbar, breadbox, breadcrumbs, breadpad)
|
|
# is bakery-managed, not pacman: the binaries and bakery manifest live in
|
|
# /etc/skel/.local (baked in at ISO build time) and are copied into the user's
|
|
# home below, so the install works fully offline with no DNS for bakery/GitHub.
|
|
# bos-settings is the only pacman bread package and was installed by unpackfs.
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Deploy dotfiles + the bakery bread ecosystem into the user's home (Calamares
|
|
# already seeds from /etc/skel, but copy explicitly too so a fresh install is
|
|
# self-contained even if the users module skips skel). Don't clobber existing.
|
|
# ---------------------------------------------------------------------------
|
|
if [[ -n "$MAIN_USER" && -d /etc/skel ]]; then
|
|
for d in .config .local .cache; do
|
|
[[ -d "/etc/skel/$d" ]] || continue
|
|
mkdir -p "/home/$MAIN_USER/$d"
|
|
cp -rn "/etc/skel/$d/." "/home/$MAIN_USER/$d/" || true
|
|
chown -R "$MAIN_USER:$MAIN_USER" "/home/$MAIN_USER/$d" || true
|
|
done
|
|
sudo -u "$MAIN_USER" xdg-user-dirs-update || true
|
|
fi
|
|
|
|
echo "BOS post-install complete."
|